英语翻译此外,本周,XX"产品未通过在我们实验室的测试：.今天我检查了各个尺寸产品的该部位的结构,发现其模具弧度有差异,其中XX"的转角部位弧度最为圆滑,而XX"与XX"寸转角比较直,这可能会

英语翻译此外,本周,XX"产品未通过在我们实验室的测试：.今天我检查了各个尺寸产品的该部位的结构,发现其模具弧度有差异,其中XX"的转角部位弧度最为圆滑,而XX"与XX"寸转角比较直,这可能会
英语翻译
此外,本周,XX"产品未通过在我们实验室的测试：.
今天我检查了各个尺寸产品的该部位的结构,发现其模具弧度有差异,其中XX"的转角部位弧度最为圆滑,而XX"与XX"寸转角比较直,这可能会影响到测试时的受力,以及测试结果.所以,你们需要研究是否修理模具.
关于XX"破裂的问题,虽然属于个例,但需要你们同XXX一起查找原因,而且以后每批都进行测试.

英语翻译此外,本周,XX"产品未通过在我们实验室的测试：.今天我检查了各个尺寸产品的该部位的结构,发现其模具弧度有差异,其中XX"的转角部位弧度最为圆滑,而XX"与XX"寸转角比较直,这可能会
In addtion, the product"xx" failed to pass the test in our Lab this week.
Today, I have examined the structure of the same position of products in different sizes, finding that there are differences for the radians of their moulds, the arc of the intersection parts of xx sleekest, and the corners of xx and xx quite straight, which may have impact on the pressure in a test and the result of that test. Consequently, you need to study whether to repair moulds.(这里的句子不要改,有些我作了处理,看上去好像没有系动词.）
As for the fracture of XX, rare example as it is, you should figure out the cause with XXX together , and prepare to test each batch in future.

In addition, this week, XX " products have not been adopted in our laboratory test:....
Today I went over all dimension product the parts of the structure, the mold radian differences, in which XX...

全部展开

In addition, this week, XX " products have not been adopted in our laboratory test:....
Today I went over all dimension product the parts of the structure, the mold radian differences, in which XX " at the bend of the smooth arc, while the XX " and XX "inch angle relatively straight, which may affect the test stress, and test results. So, you need to study whether die repair.
On the XX " broken problem, although belonging to the case, but you need the same XXX together to find the reasons, and after each batch testing.

收起

In addition, this week, XX " products have not been adopted in our laboratory test:....
Today I went over all dimension product the parts of the structure, the mold radian differences, in which XX...

全部展开

In addition, this week, XX " products have not been adopted in our laboratory test:....
Today I went over all dimension product the parts of the structure, the mold radian differences, in which XX " at the bend of the smooth arc, while the XX " and XX "inch angle relatively straight, which may affect the test stress, and test results. So, you need to study whether die repair.
On the XX " broken problem, although belonging to the case, but you need the same XXX together to find the reasons, and after each batch testing.望采纳，谢谢！

收起

蒽、这是翻译：
In addition, this week, XX \"product has not through in our laboratory tests:...
today I check the size of each product the parts of the structure, and found that the differences of m...

全部展开

蒽、这是翻译：
In addition, this week, XX \"product has not through in our laboratory tests:...
today I check the size of each product the parts of the structure, and found that the differences of mould radian, XX\" the corner of the site radian most pliable, and XX \"and XX\" inch corner is straight, this may affect the stress test, and the test results. So, you need to study whether mold repair. About XX \"broken a problem, though, but you need to belong to an with XXX together, and find the reasons of each batch test after all.
还望采纳，谢谢

收起